Half Cylinder Antique Brass 35/10 (45mm overall) - High quality, Anti-Bump, Kitemarked BS EN1303:2005 Euro cylinder lock for fire exits, garage doors, shutters or one way locking doors.

Half Cylinder Antique Brass 35/10 (45mm overall) - High quality, Anti-Bump, Kitemarked BS EN1303:2005 Euro cylinder lock for fire exits, garage doors, shutters or one way locking doors.

BSI Kitemark - KM561977, Meets PAS 024:2009
Tested to BSEN 1303:2005, the highest European security grade
3 Anti-Pick Pins - to protect the lock, Secured by design in association with Chief Police Officers
Anti-Pull - Resists plug pull attack, Anti-Bump - Resists Lock bumping or zero pin lift attack
Over 30000 combinations for the ultimate key security & tested to over 100000 key turn cycles

35/10 (45mm overall) Euro Half Cylinder from UAP High quality & performance half cylinder! This high quality and cost-effective, anti-bump kitemarked euro cylinder lock provides many security features at a fraction of the cost. Proving to be a excellent choice for people wanting a low cost, high quality half cylinder replacement. Manufactured to British Standard (EN1303: 2005 the same as Yale), and kitemarked: KM561977 this is a cylinder that you can trust. Generally used in garages doors, fire doors, stock rooms and doors that can only be opened from oneside or anywhere else that might need a replacement euro half cylinder. Why choose this euro half cylinder lock * BSI Kitemark - KM561977 * Tested to BSEN 1303:2005, the highest European security grade * Meets PAS 024:2007 * 3 Anti-pick pins to protect the lock * Anti-Pull - Resists the plug pull attack * Anti-Bump or zero lift - more about this below * Anti-Screw - AKA plug pull * Over 30,000 combinations for ultimate key security * Tested to over 100,000 cycles * Secured by Design - product recommended by Association of Chief Police Officers Why is Anti-Bump so important? The term Lock Bumping describes the process in which an adapted key is inserted into common pin-based locks and through application of torque and strikes to the key the door can be opened in seconds. Such attacks are increasing across the UK and leave little or no visable signs of damage, which can hamper any subsequent insurance claim. There are videos on popular internet video sites explaining this under "lock bumping".

List Price:
Price: £8.99

UAP Anti-Snap Keyed-Alike Pair of Euro Cylinder Nickel 35/55 (90mm overall) Locks - Kitemarked high security locks, for patio doors or use the same key front & back. BS Kitemark deters burglars, insurance approved & protects against lock bumping, extraction, picking, plug pulling & lock drilling.

UAP Anti-Snap Keyed-Alike Pair of Euro Cylinder Nickel 35/55 (90mm overall) Locks - Kitemarked high security locks, for patio doors or use the same key front & back. BS Kitemark deters burglars, insurance approved & protects against lock bumping, extraction, picking, plug pulling & lock drilling.

BSI Kitemarked, Tested to BSEN 1303:2005, the highest European security grade
Meets PAS 024:2007, 3 Anti-pick pins to protect the lock, 6 keys supplied
Anti-Snap, Anti-Bump, Anti-Pick, Anti-Drill & Anti-Extraction technology - also resist screw attacks
Enhanced Key security - over 30,000 key combinations & Tested to over 100,000 cycles
Secured by Design - product recommended by Association of Chief Police Officers

Anti-snap cylinders stop burglars in their tracks - it takes a couple minutes to change your lock to avoid it! Lock Snapping is used in 27% of burglaries in parts of the UK! This excellent euro cylinder is for anyone wanting high level security at a low cost. Why choose an Anti-snap lock? Burglars use tools like mole grips to twist & break handle backplates to expose the end of the lock. The weakest point on a euro cylinder is the area around the middle fixing screw & if too much lock protrudes from the door it can be clamped, twisted & broken in a simple action. The burglar is able to insert something into the lock & turn the locking point to open the door. It's simple & fast and is a common attack method. Anti-snap cuts are designed into the lock 15mm from the end. When force is applied to the end of the lock, it breaks at the anti-snap shear line. This lock still allows you to use your key even though it's shorter the lock & handle will need replacing. What size do you need? Removing existing cylinder 1, Put your key in the lock & open the door. 2, Remove the screw which is beneath the latch. 3, Turn the key while apply slight pressure to the opposite end of the cylinder. As you do so the cam will line up with the rest of the lock & you'll be able to slide the cylinder out towards yourself. The key needs to be turned approx. 25º clockwise or anti-clockwise. Measuring the existing lock On the side of the lock, under the cam, you'll see a Fixing Hole. The size required is determined by the distance from each edge of the cylinder to the centre of the fixing hole.* Measure from the end of the cylinder to the centre of the Fixing Hole, to give the first measurement (a) * Measure from the centre of the Fixing Hole to the other end of the cylinder, to give the second measurement (b) If you measured 35mm & 45mm, or 45mm & 35mm, then choose is 35/45.

List Price:
Price: £34.99

UAP Anti-Snap Thumbturn Euro Cylinder Antique Brass 55/35 T (90mm overall) Lock - Kitemarked high security British Standard BS EN 1303:2005 lock. Insurance approved, protects against Lock Bumping, Extraction, Picking, Plug Pulling, & Lock Drilling.

UAP Anti-Snap Thumbturn Euro Cylinder Antique Brass 55/35 T (90mm overall) Lock - Kitemarked high security British Standard BS EN 1303:2005 lock. Insurance approved, protects against Lock Bumping, Extraction, Picking, Plug Pulling, & Lock Drilling.

BSI Kitemarked, Tested to BSEN 1303:2005, the highest European security grade
Meets PAS 024:2007, 3 Anti-pick pins to protect the lock, 3 keys supplied
Anti-Snap, Anti-Bump, Anti-Pick, Anti-Drill & Anti-Extraction technology - also resist screw attacks
Enhanced Key security - over 30,000 key combinations & Tested to over 100,000 cycles
Secured by Design - product recommended by Association of Chief Police Officers

Anti-snap Thumbturn cylinders stop burglars in their tracks - it only takes a couple minutes to change your lock! Lock Snapping is used in 27% of burglaries in parts of the UK! This excellent thumbturn cylinder is for anyone wanting high level security at a low cost. Why choose an Anti-snap lock? Burglars use tools like mole grips to twist & break handle backplates to expose the end of the lock. The weakest point on a euro cylinder is the area around the middle fixing screw & if too much lock protrudes from the door it can be clamped, twisted & broken in a simple action. The burglar is able to insert something into the lock & turn the locking point to open the door. It's simple, fast & a common attack method. Anti-snap cuts are designed into the lock 15mm from the end. When force is applied to the end of the lock, it breaks at the anti-snap shear line. This lock still allows you to use your key even though it's shorter the lock & handle will need replacing. What size do you need? Removing existing cylinder 1, Put your key in the lock & open the door. 2, Remove the screw which is beneath the latch. 3, Turn the key while apply slight pressure to the opposite end of the cylinder. The cam will line up with the rest of the lock & you'll be able to slide the cylinder out towards yourself. The key needs to be turned approx. 25° clockwise or anti-clockwise. Measuring the existing lock On the side of the lock, under the cam, you'll see a Fixing Hole. The size required is determined by the distance from each edge of the cylinder to the centre of the fixing hole.* Measure from the end of the cylinder to the centre of the Fixing Hole, to give the first measurement (a)* Measure from the centre of the Fixing Hole to the other end of the cylinder, to give the second measurement (b) If you measured 35mm & 45mm, or 45mm & 35mm, then choose is 35/45.

List Price:
Price: £16.49

UAP Anti-Snap Euro Cylinder Nickel 30/40 (70mm overall) - High security anti-snap door lock. BS Kitemarked deters burglars, Insurance approved & protects against Lock Bumping, Extraction, Picking, Plug Pulling, & Lock Drilling. Tested to British Standard BS EN 1303:2005.

UAP Anti-Snap Euro Cylinder Nickel 30/40 (70mm overall) - High security anti-snap door lock. BS Kitemarked deters burglars, Insurance approved & protects against Lock Bumping, Extraction, Picking, Plug Pulling, & Lock Drilling. Tested to British Standard BS EN 1303:2005.

BSI Kitemarked, Tested to BSEN 1303:2005, the highest European security grade
Meets PAS 024:2007, 3 Anti-pick pins to protect the lock, 3 keys supplied
Anti-Snap, Anti-Bump, Anti-Pick, Anti-Drill & Anti-Extraction technology - also resist screw attacks
Enhanced Key security - over 30,000 key combinations & Tested to over 100,000 cycles
Secured by Design - product recommended by Association of Chief Police Officers

Anti-snap cylinders stop burglars in their tracks - it takes a couple minutes to change your lock to avoid it! Lock Snapping is used in 27% of burglaries in parts of the UK! This excellent euro cylinder is for anyone wanting high level security at a low cost. Why choose an Anti-snap lock? Burglars use tools like mole grips to twist & break handle backplates to expose the end of the lock. The weakest point on a euro cylinder is the area around the middle fixing screw & if too much lock protrudes from the door it can be clamped, twisted & broken in a simple action. The burglar is able to insert something into the lock & turn the locking point to open the door. It's simple & fast and is a common attack method. Anti-snap cuts are designed into the lock 15mm from the end. When force is applied to the end of the lock, it breaks at the anti-snap shear line. This lock still allows you to use your key even though it's shorter the lock & handle will need replacing. What size do you need? Removing existing cylinder 1, Put your key in the lock & open the door. 2, Remove the screw which is beneath the latch. 3, Turn the key while apply slight pressure to the opposite end of the cylinder. As you do so the cam will line up with the rest of the lock & you'll be able to slide the cylinder out towards yourself. The key needs to be turned approx. 25º clockwise or anti-clockwise. Measuring the existing lock On the side of the lock, under the cam, you'll see a Fixing Hole. The size required is determined by the distance from each edge of the cylinder to the centre of the fixing hole.* Measure from the end of the cylinder to the centre of the Fixing Hole, to give the first measurement (a) * Measure from the centre of the Fixing Hole to the other end of the cylinder, to give the second measurement (b) If you measured 35mm & 45mm, or 45mm & 35mm, then choose is 35/45.

List Price:
Price: £10.99

UAP Anti-Snap Euro Cylinder Nickel 45/50 (95mm overall) - High security anti-snap door lock. BS Kitemarked deters burglars, Insurance approved & protects against Lock Bumping, Extraction, Picking, Plug Pulling, & Lock Drilling. Tested to British Standard BS EN 1303:2005.

UAP Anti-Snap Euro Cylinder Nickel 45/50 (95mm overall) - High security anti-snap door lock. BS Kitemarked deters burglars, Insurance approved & protects against Lock Bumping, Extraction, Picking, Plug Pulling, & Lock Drilling. Tested to British Standard BS EN 1303:2005.

BSI Kitemarked, Tested to BSEN 1303:2005, the highest European security grade
Meets PAS 024:2007, 3 Anti-pick pins to protect the lock, 3 keys supplied
Anti-Snap, Anti-Bump, Anti-Pick, Anti-Drill & Anti-Extraction technology - also resist screw attacks
Enhanced Key security - over 30,000 key combinations & Tested to over 100,000 cycles
Secured by Design - product recommended by Association of Chief Police Officers

Anti-snap cylinders stop burglars in their tracks - it takes a couple minutes to change your lock to avoid it! Lock Snapping is used in 27% of burglaries in parts of the UK! This excellent euro cylinder is for anyone wanting high level security at a low cost. Why choose an Anti-snap lock? Burglars use tools like mole grips to twist & break handle backplates to expose the end of the lock. The weakest point on a euro cylinder is the area around the middle fixing screw & if too much lock protrudes from the door it can be clamped, twisted & broken in a simple action. The burglar is able to insert something into the lock & turn the locking point to open the door. It's simple & fast and is a common attack method. Anti-snap cuts are designed into the lock 15mm from the end. When force is applied to the end of the lock, it breaks at the anti-snap shear line. This lock still allows you to use your key even though it's shorter the lock & handle will need replacing. What size do you need? Removing existing cylinder 1, Put your key in the lock & open the door. 2, Remove the screw which is beneath the latch. 3, Turn the key while apply slight pressure to the opposite end of the cylinder. As you do so the cam will line up with the rest of the lock & you'll be able to slide the cylinder out towards yourself. The key needs to be turned approx. 25º clockwise or anti-clockwise. Measuring the existing lock On the side of the lock, under the cam, you'll see a Fixing Hole. The size required is determined by the distance from each edge of the cylinder to the centre of the fixing hole.* Measure from the end of the cylinder to the centre of the Fixing Hole, to give the first measurement (a) * Measure from the centre of the Fixing Hole to the other end of the cylinder, to give the second measurement (b) If you measured 35mm & 45mm, or 45mm & 35mm, then choose is 35/45.

List Price:
Price: £10.99

UAP Anti-Snap Euro Cylinder Nickel 35/45 (80mm overall) - High security anti-snap door lock. BS Kitemarked deters burglars, Insurance approved & protects against Lock Bumping, Extraction, Picking, Plug Pulling, & Lock Drilling. Tested to British Standard BS EN 1303:2005.

UAP Anti-Snap Euro Cylinder Nickel 35/45 (80mm overall) - High security anti-snap door lock. BS Kitemarked deters burglars, Insurance approved & protects against Lock Bumping, Extraction, Picking, Plug Pulling, & Lock Drilling. Tested to British Standard BS EN 1303:2005.

BSI Kitemarked, Tested to BSEN 1303:2005, the highest European security grade
Meets PAS 024:2007, 3 Anti-pick pins to protect the lock, 3 keys supplied
Anti-Snap, Anti-Bump, Anti-Pick, Anti-Drill & Anti-Extraction technology - also resist screw attacks
Enhanced Key security - over 30,000 key combinations & Tested to over 100,000 cycles
Secured by Design - product recommended by Association of Chief Police Officers

Anti-snap cylinders stop burglars in their tracks - it takes a couple minutes to change your lock to avoid it! Lock Snapping is used in 27% of burglaries in parts of the UK! This excellent euro cylinder is for anyone wanting high level security at a low cost. Why choose an Anti-snap lock? Burglars use tools like mole grips to twist & break handle backplates to expose the end of the lock. The weakest point on a euro cylinder is the area around the middle fixing screw & if too much lock protrudes from the door it can be clamped, twisted & broken in a simple action. The burglar is able to insert something into the lock & turn the locking point to open the door. It's simple & fast and is a common attack method. Anti-snap cuts are designed into the lock 15mm from the end. When force is applied to the end of the lock, it breaks at the anti-snap shear line. This lock still allows you to use your key even though it's shorter the lock & handle will need replacing. What size do you need? Removing existing cylinder 1, Put your key in the lock & open the door. 2, Remove the screw which is beneath the latch. 3, Turn the key while apply slight pressure to the opposite end of the cylinder. As you do so the cam will line up with the rest of the lock & you'll be able to slide the cylinder out towards yourself. The key needs to be turned approx. 25º clockwise or anti-clockwise. Measuring the existing lock On the side of the lock, under the cam, you'll see a Fixing Hole. The size required is determined by the distance from each edge of the cylinder to the centre of the fixing hole.* Measure from the end of the cylinder to the centre of the Fixing Hole, to give the first measurement (a) * Measure from the centre of the Fixing Hole to the other end of the cylinder, to give the second measurement (b) If you measured 35mm & 45mm, or 45mm & 35mm, then choose is 35/45.

List Price:
Price: £10.99