Ingersoll SC71 Case Only Brass

Ingersoll SC71 Case Only Brass

SC71 Rim Deadbolt Case Only
Brass




Lock parts for Ingersoll locks including strike plates, door pulls, replacement cylinders and electric releases.

List Price:
Price: £56.95

Euro Cylinder Thumb Turn (40mmx55mm) - Brass - ANTI-PICK ANTI-DRILL High Security uPVC Door Lock Cylinder Barrel

Euro Cylinder Thumb Turn (40mmx55mm) - Brass - ANTI-PICK ANTI-DRILL High Security uPVC Door Lock Cylinder Barrel

High performance 5/6 Pin anti-drill cylinders
Offers resistance to drilling, picking, push and pull actions to deter forced entry
Three keys per cylinder
WHEN MEASURING YOUR CYLINDER FOR A REPLACEMENT OR UPGRADE - CHECK OUR MEASURING GUIDE (IMAGE 2)
*SEE OUR STORE FOR DIFFERENT COLOURS AND SIZES*

Euro Cylinder Thumb Turn

Thumb-turn cylinders offer the ideal security solution. The door can be locked and unlocked from the inside without the use of a key but without diminishing the level of security. This type of lock is also ideal in case of fires. If you have locked your door and could not find the key to get out in case of an emergency, what would you do?

-These replacement thumbturn cylinders enhance the security of your door and are so easy to fit that any DIY novice can do it in minutes!

Measure your existing thumbturn cylinder to find the two sizes as shown in image 2 (sizes are to the centre of the screw hole).

List Price:
Price: £14.99

UAP Anti-Snap Thumbturn Euro Cylinder Antique Brass 55/35 T (90mm overall) Lock - Kitemarked high security British Standard BS EN 1303:2005 lock. Insurance approved, protects against Lock Bumping, Extraction, Picking, Plug Pulling, & Lock Drilling.

UAP Anti-Snap Thumbturn Euro Cylinder Antique Brass 55/35 T (90mm overall) Lock - Kitemarked high security British Standard BS EN 1303:2005 lock. Insurance approved, protects against Lock Bumping, Extraction, Picking, Plug Pulling, & Lock Drilling.

BSI Kitemarked, Tested to BSEN 1303:2005, the highest European security grade
Meets PAS 024:2007, 3 Anti-pick pins to protect the lock, 3 keys supplied
Anti-Snap, Anti-Bump, Anti-Pick, Anti-Drill & Anti-Extraction technology - also resist screw attacks
Enhanced Key security - over 30,000 key combinations & Tested to over 100,000 cycles
Secured by Design - product recommended by Association of Chief Police Officers

Anti-snap Thumbturn cylinders stop burglars in their tracks - it only takes a couple minutes to change your lock! Lock Snapping is used in 27% of burglaries in parts of the UK! This excellent thumbturn cylinder is for anyone wanting high level security at a low cost. Why choose an Anti-snap lock? Burglars use tools like mole grips to twist & break handle backplates to expose the end of the lock. The weakest point on a euro cylinder is the area around the middle fixing screw & if too much lock protrudes from the door it can be clamped, twisted & broken in a simple action. The burglar is able to insert something into the lock & turn the locking point to open the door. It's simple, fast & a common attack method. Anti-snap cuts are designed into the lock 15mm from the end. When force is applied to the end of the lock, it breaks at the anti-snap shear line. This lock still allows you to use your key even though it's shorter the lock & handle will need replacing. What size do you need? Removing existing cylinder 1, Put your key in the lock & open the door. 2, Remove the screw which is beneath the latch. 3, Turn the key while apply slight pressure to the opposite end of the cylinder. The cam will line up with the rest of the lock & you'll be able to slide the cylinder out towards yourself. The key needs to be turned approx. 25° clockwise or anti-clockwise. Measuring the existing lock On the side of the lock, under the cam, you'll see a Fixing Hole. The size required is determined by the distance from each edge of the cylinder to the centre of the fixing hole.* Measure from the end of the cylinder to the centre of the Fixing Hole, to give the first measurement (a)* Measure from the centre of the Fixing Hole to the other end of the cylinder, to give the second measurement (b) If you measured 35mm & 45mm, or 45mm & 35mm, then choose is 35/45.

List Price:
Price: £16.49

5 Lever BS3621 High Security Sashlock 76mm Brass

5 Lever BS3621 High Security Sashlock 76mm Brass

Brass Faceplates
BS3621:2004 standard
Locks come with 2 keys each



5 Lever BS3621 High Security Sashlock 76mm Brass

List Price:
Price: £14.97

Yale Locks AS5040BN 50cm/ 40cm Anti-Snap Euro Cylinder - Bright Nickel

Yale Locks AS5040BN 50cm/ 40cm Anti-Snap Euro Cylinder - Bright Nickel

Size: 50S/40 - 90mm
Finish: Nickel Plated
S Refers to Snap-Off Side



Yale Locks Anti-snap Euro Cylinder 50/40 (90mm) Bright Nickel YALAS5040BN The Yale Anti-Snap cylinder has been developed to provide total protection against all known cylinder attack methods. Tested to the British Standard BS EN1303:2005 and Sold Secure Diamond Standard SS312, the cylinder is suitable as a replacement product on PVCu, wood and composite doors that require maximum level of security against physical and manipulation attacks. The cylinder carries the highest accreditations to this lock type - Kitemark, Sold Secure (Diamond standard SS312) and Secured by Design approved. Available in Double Euro and Thumbturn styles in Polished brass and bright Nickel finishes and supplied with 3 keys and a 10 year guarantee.To specify the correct cylinder for your lock, remove the existing cylinder and measure the overall length, as well as the distance from the centre screw to each end (taking note of which end is the external side). The first measurement specified below in the 'cylinder type' is the external side, with the pre-snap feature.The YALAS5040BN Anti-snap Euro Cylinder has the following specifications:Type: Double EuroCylinder Type: External 50mm Internal 40mm Size: 90mmFinish: Bright Nickel YALAS5040BN

List Price:£46.81
Price: £31.30

New Pad lock garage shed or chain security 110dB Siren Alarm Padlock motion detector with 3 keys.

New Pad lock garage shed or chain security 110dB Siren Alarm Padlock motion detector with 3 keys.

Stainless Steel shackle and hardened zinc alloy body for greater weather and vandal resistance
Suitable for use in a wide range of applications
Can be used unarmed as a normal padlock



This Security Alarm Padlock, when armed, emits an ear-piercing ultra loud siren when movement or shock is detected, increasing the chances of scaring away thieves and protecting your valuables. The padlock features a 110db internal siren which sounds if the lock is moved, touched or knocked after it has been armed. The padlock has been manufactured to the highest standards, with a stainless steel shackle and hardened zinc alloy body. The body of the padlock has been powder-coated providing extra corrosion, water and weather resistance. The versatility of the padlock make it suitable for use in any number of applications, including garden sheds, gates, garages, lock-boxes, bikes, toolboxes, trailers, caravans, lawn mowers and garden machinery.Product Features Ultra loud siren to repel thievesIncludes special security keys to minimise chances of key duplication

List Price:
Price: £8.85

Ingersoll Replacement Cylinder - Brass

Ingersoll Replacement Cylinder - Brass

Face Diameter: 52mm
Body Length: 32mm
Body Diameter: 31mm
Brass


Lock parts for Ingersoll locks including strike plates, door pulls, replacement cylinders and electric releases.

List Price:
Price: £56.95